| 1050, 1070, 3003 | 96.95-99.70 percent | O, H12, H14 | 0.5-4.5 | 90-1020 | |
Alloy: 1050, 1060, 1070, 1100, 3002, 3003, 3004, 5052A, 5052, 5754, 6061
Hardness: O, H12, H14, H16, H18
Thickness: 0.3-10 mm
Diameter: 100-1500 mm
| V | |||||||||||||
| 1050 | 0.25 | 0.40 | 0.05 | 0.05 | 0.05 | – | – | 0.05 | – | 0.05 | 0.03 | 0.03 | 99.50 |
| 1070 | 0.25 | 0.25 | 0.04 | 0.03 | 0.03 | – | – | 0.04 | – | 0.05 | 0.03 | 0.03 | 99.70 |
| 3003 | 0.60 | 0.70 | 0.05-0.20 | 1.00-1.50 | 0.03 | – | – | 0.10 | – | – | – | 0.15 | 96.75 |
| O | 0.4-6.0 | 60-100 | Greater than or equal to 20 | GB/T3190-1996 |
| H12 | 0.5-6.0 | 70-120 | Greater than or equal to 4 | |
| H14 | 0.5-6.0 | 85-120 | Greater than or equal to 2 |
| 0.5-4.5 | D Less than or equal to 455 | 455< D ≤ 1000 | 1000< D ≤ 1200 |
| plus /- 0.079 | plus /- 0.099 | plus /- 0.015 | |
1.Quality assured
2.Longer shelf life
3.Precisely shaped










