?

 coating materials. The addition of manganese to aluminum increases strength somewhat through solution strengthening and improves strain hardening while not appreciably reducing ductility or corrosion resistance. The major composition of Al-Mg alloy wire is aluminum. A small amount of magnesium is added to enhance the strength. With excellent anti-corrosion properties, lightweight, low density, good heat radiation, and strong resistance to pressure, it can meet 3C products' requirements, which demand high integration, miniaturization, electromagnetic shielding, etc. Its hardness is several times bigger than glass wire, but the weight is only 1/3. Now it is widely used in the waterproof and shielding layer of cable or outer conductor of AN.

1. Specifications of Aluminum Alloy Magnesium Wire

Aluminum grade: 5056, 5154, etc.

Diameter: 0.12mm – 10.25mm

Tensile strength: 220MPa – 345MPa

Electrical resistance: Less than or equal to 0.054 Ω

Elongation at break: Greater than or equal to 6 percent

Storage and transportation: according to GB 3199, it shall be stored in a dry and clean warehouse, get rid of heat source exceeding 37 degree .

2. Applications 

CCAM stranded wire and parallel wire are widely used for: high-frequency signal transmission, leak spilled cable inner conductor, network cable inner conductor, subtle coaxial cable inner conductor, conductive materials of the cable TV coaxial cable, flexible RF coaxial cable inner conductor, computer cable, control cable, and other data cables inner conductor.

3. Features 

4. Standard Products of Aluminum Alloy Magnesium Wire

Diameter: 1.62 mm (14 ga); 2 mm (5/64 in); 2.0 mm (0.079 in); 2.3 mm (11 ga); 2.5 mm (0.098 in); 3.2 mm (1/8 in); 4.0 mm (0.157 in); 4.8 mm (3/16 in)

TSW1367 Aluminum Magnesium Alloy Wire (Al-Mg Alloy)

Order Process of Aluminum Magnesium Alloy Wire (Al-MG Alloy Wire)